Straight thru cabling

Straight thru cabling

• 1.
   
• 2.
  wo o WGB WB G WBR BR 1 2 3 4 5 6 7 8 PINS wo o WG B WB G WBR BR 1 2 3 4 5 6 7 8 PINS CLIP IS POINTED AWAY FROM YOU
• 3.
  Cut the cableinsulator to show all the eight wires.
• 4.
  Strip off theinsulator.
• 5.
  Sepate all eightwires.
• 6.
  Position all eightwires according to its assigned pins in the RJ45 . 1 2 3 4 5 6 7 8
• 7.
  Position all wires.Make sure that all are in proper pin assignment.
• 8.
  Cut the wires.
• 9.
  Make sure thatthe cut is even and small enough for the RJ45.
• 10.
  Put all wiresinside the RJ45. Pin 1
• 11.
  Make sure allwires reach the pins
• 12.
  Crimp the RJ45using Crimpping tool
• 13.
  Now you haveyour Straight –thru network cable. Repeat the steps on the other end of your cable.
• 14.
  wo o WGB WB G WBR BR 1 2 3 4 5 6 7 8 PINS wo o WG B WB G WBR BR 1 2 3 4 5 6 7 8 PINS CLIP IS POINTED AWAY FROM YOU